Wayne-Dalton Model 451 Commercial Overhead Door
Wayne Dalton’s Aluminum Full-View doors are the preferred choice when visibility and light transmission are just as important as aesthetics. These doors are weather resistant and virtually maintenance free, and are ideal for commercial applications such as auto dealerships, car washes, and restaurant patios.
Features
- Max Width: 22’2” (6,705.6mm)
- Max Height: 16’1” (4,902.2mm)
- Door Assembly: Stile and rail assembly of aluminum alloy 6063-T6, 1 3/8" thick stiles and rails, joined with self tapping screws.
- Air Infiltration: Meets IECC® requirements for air infiltration with 3rd party tested values below 0.4 cfm/ft2.
- Rails: Top and bottom rails with 3 1/2" wide, lower intermediate rail 1 3/8", upper rail 1 5/8", minimum wall thickness 0.062".
- Stiles: Single end stiles are 3 1/2" wide, center stile 3" wide, minimum wall thickness 0.062".
- Springs: 10,000 cycles
- Glazing: 1/8" (3mm) in 9 options, 1/4" (6mm) in 5 options, 1/2" (13 mm) in 4 options, 5/8" (16 mm) in 3 options.
- Finish: Clear anodized
- Wind Load: Provide to meet the design/performance requirements specified.
- Lock: Interior mounted slide lock.
- Weatherstripping: Flexible bulb-type strip at bottom section.
- Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
- Manual Operation: Pull rope or chain hoist
